Stateline Woodturners
 |
 |
 |
 |
 |
 |
 |
 |
Buy, Sell or Trade!
For Sale:
-Router bits: Two racks of about 50 each. $30 for each rack or both for $50.
-Sears 12" band saw with 45 degree tilt. Extra blades. About 16 years old...with base $200.
-De walt thickness planar with extra set of new knives $275
-Delta 14" band saw with enclosed cabinet, and riser. Mini mobile shopfox base $300
-Delta 10" table saw w/stand and original fence $250. Recent classic fox fence $100 or both
for $325.
-16" X 43" Grizzly swivel head wood lathe with cast iron legs and digital speed read out. New
cost $395 will sell for $290. Less than one year old, used very little.
Contact Mark Ost at 417-223-4435
-Router bits: Two racks of about 50 each. $30 for each rack or both for $50.
-Sears 12" band saw with 45 degree tilt. Extra blades. About 16 years old...with base $200.
-De walt thickness planar with extra set of new knives $275
-Delta 14" band saw with enclosed cabinet, and riser. Mini mobile shopfox base $300
-Delta 10" table saw w/stand and original fence $250. Recent classic fox fence $100 or both
for $325.
-16" X 43" Grizzly swivel head wood lathe with cast iron legs and digital speed read out. New
cost $395 will sell for $290. Less than one year old, used very little.
Contact Mark Ost at 417-223-4435
For Sale:
Delta Model DL-40 16" swing Lathe. 110 volt, electronic control variable speed with
reverse. 8 TPI headstock, bed extension and 3" faceplate are included. Asking $800, OBO.
Contact Thermon Crocker at 479-442-9360 or 479-790-5538.
Delta Model DL-40 16" swing Lathe. 110 volt, electronic control variable speed with
reverse. 8 TPI headstock, bed extension and 3" faceplate are included. Asking $800, OBO.
Contact Thermon Crocker at 479-442-9360 or 479-790-5538.
For Sale:
Old freezer wood dryer. It is an old freezer with two holes cut in it, with a thermostat to
regulate the temperature. FREE!!!
Contact Harold Stoner at 479-925-2940
Old freezer wood dryer. It is an old freezer with two holes cut in it, with a thermostat to
regulate the temperature. FREE!!!
Contact Harold Stoner at 479-925-2940
For Sale:
Grizzley G 1495 lathe. 3/4 horsepower,14" swing, 40" between centers, 500 to 3070 RPM.
$350, OBO.
Contact: Mick HUtchinson at 479-751-4587
Grizzley G 1495 lathe. 3/4 horsepower,14" swing, 40" between centers, 500 to 3070 RPM.
$350, OBO.
Contact: Mick HUtchinson at 479-751-4587